Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Memphis, TN

CHI Overhead Doors Garage Door Panel Replacement in Memphis, TN

Dented, cracked or rusted sections replaced or repaired to match your door. Typical cost $300-$900.

Garage doors rarely fail at a convenient time. If you need CHI Overhead Doors garage door panel replacement in Memphis, TN, we can often come out the same day when a technician is available. Dented, cracked or rusted sections replaced or repaired to match your door. Whether your CHI Overhead Doors garage door is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Is it time for CHI Overhead Doors garage door panel replacement?

  • Dents or creases from a vehicle, ball or hail
  • Cracked or split sections
  • Rust coming through the paint, often on the bottom panel
  • Panels bowing so the door binds

Why this happens

  • Impact from cars, equipment or storms
  • Moisture rusting the bottom panel
  • Wood panels rotting or splitting
  • An unbalanced door bending the top section

What you can check yourself

  • Note the brand and model from the label on the door's edge or inside face.
  • Photograph the damage. It helps us match the panel.
  • Check whether the damage spreads across the hinge line.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle CHI Overhead Doors garage door panel replacement

  1. Identify the door's brand, model, design and color
  2. Confirm the panel is still available, or price a replacement door if it isn't
  3. Remove the damaged section safely
  4. Install and align the new panel and hardware
  5. Rebalance the door, since panel weight can change

Discontinued panels can be hard to match. If several sections are damaged, a new door is often the better value.

How much does CHI Overhead Doors garage door panel replacement cost?

$300-$900Typical range, parts & labor
1-3 hours once the panel arrivesTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other CHI Overhead Doors services

Local CHI Overhead Doors garage door panel replacement for Memphis, TN

In Tennessee, steel panels rust where the paint has been scratched or dented, and wood doors swell, warp or rot if the finish isn't kept up.

Technicians serve all of Memphis (ZIP codes 37501, 37544, 38101, 38103, 38104 and more), plus West Memphis, AR (7.7 mi), Marion, AR (9.5 mi), Bartlett (10.6 mi) and Southaven, MS (11.3 mi). Call (833) 435-8883 to book a visit in Memphis.

CHI Overhead Doors Garage Door Panel Replacement: frequently asked questions

How much does CHI Overhead Doors garage door panel replacement cost in Memphis, TN?

CHI Overhead Doors Garage Door Panel Replacement typically costs $300-$900 including parts and labor, and usually takes 1-3 hours once the panel arrives. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do CHI Overhead Doors garage door panel replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is CHI Overhead Doors garage door panel replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and CHI Overhead Doors warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Tennessee or Memphis requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Memphis, TN

Linear Garage Door Opener Installation

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $350-$800

Midland Garage Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Wayne Dalton Extension Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Belt Drive Opener Installation & Repair

Quiet belt-drive openers, ideal for garages under bedrooms.

Typical $400-$900

Clopay Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Linear Garage Door Opener Repair

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $125-$350

Richards-Wilcox Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

LiftMaster Smart Garage Door Opener Setup

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $100-$900

Sommer Garage Door Opener Repair

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $125-$350

Raynor Extension Spring Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $150-$350

Genie Opener Gear & Sprocket Replacement

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$275

LiftMaster Commercial Door Operator Repair

LiftMaster also makes commercial trolley, jackshaft and hoist operators for sectional and rolling doors.

Typical $300-$1,200

Garage door stuck, noisy or broken?

Talk to a garage door technician in Memphis, TN now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote